9 Install the:
a WLAN
b system fan
c battery
d base cover
10 Follow the procedure in After working inside your computer.
Power button with ngerprint reader
Removing the power button with ngerprint reader
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c system fan
d display assembly
e Input output board
3 To remove the power button with ngerprint reader:
a Remove the two (M2x3) screws that secure the power button to the palmrest and keyboard assembly [1].
b Peel the ngerprint reader cable and the ngerprint reader board from the palmrest and keyboard assembly [2].
c Lift the power button with ngerprint reader away from the palmrest and keyboard assembly. [3].
Removing and installing components
53
To Next Page
Loading...
