9 Install the:
a battery
b base cover
10 Follow the procedure in After working inside your computer.
System board
Removing the system board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a base cover
b battery
c system fan
d memory module
e WLAN
f SSD
g heatsink
3 To remove the system board:
a Peel the adhesive tape from the IO board connector [1].
b Lift the connector latch and disconnect the IO board cable from the connector on the system board [2].
c Peel the adhesive tapes from the display assembly connector [3].
d Lift the connector latch and disconnect the display assembly cable from the connector on the system board [4].
64
Removing and installing components
To Next Page
Loading...
