29
Quick Start
On first configuring the HH2 for use with a Profile Probe:- select Options, Device,
PR2, PR1 or PR-Special.
Select a soil type or the generic mineral soil calibration will be used.
Connect the device and press Read and Store to take and save a reading.
See also : Profile Probe Options Summary - page 35
Display Units Options - page 33
Reading the Profile Probe - page 36.
Options
Device
Press Set at the start-up or readings screen to display the Options menu.
Scroll down to Device using the up and down keys and press Set.
Press Esc to return to the start-up screen
This sensor should now appear on the start-up screen, and re-appear at start-up if
you turn the power off.
To Next Page
Loading...