EasyManua.ls Logo

Delta AS Series - Specifications; General Specifications

Delta AS Series
632 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction
1- 5
1_
1.2 Specifications
1.2.1 General Specifications
Item Specifications
Operating temperature
-20 to +60°C
Storage temperature
-40 to +80°C
Operating humidity
595%
No condensation
Storage humidity
595%
No condensation
Work environment
No corrosive gas
Installation location
In a control box
Pollution degree
2
Ingress protection
(IP ratings)
IP20
EMC (electromagnetic
compatibility)
Refer to Chapter 7 for more information.
Vibration resistance
Tested with:
5 Hz f 8.4 Hz, constant amplitude 3.5 mm
8.4 Hz f 150 Hz, constant acceleration 1 g
Duration of oscillation: 10 sweep cycles per axis on each direction of the three
mutually perpendicular axes
International Standard IEC 61131-2 & IEC 60068-2-6 (TEST Fc)
Shock resistance
Tested with:
Half-sine wave
Strength of shock: 15 g peak value, 11 ms duration
Shock direction: The shocks on each direction per axis, of the three mutually
perpendicular axes (for a total of 18 shocks)
International Standard IEC 61131-2 & IEC 60068-2-27 (TEST Ea)
Safety
Conforms to IEC 61131-2, UL508
Ambient air
temperature-
barometric
pressure-altitude
Operating: 1080 ~ 795hPa (-1000 ~ 2000 m)
Storage:1080 ~ 660hPa (-1000 ~ 3500 m)

Table of Contents

Other manuals for Delta AS Series

Related product manuals