Delta AS Series Manual

AS Series Module Manual
9- 38
_9
2) RTU Mode: (AS Series PLC acting as a Scanner)
 RTU Error Code: refer to Section 9.7 for more information.
 I/O Module Error Code: refer to the I/O module manual for more information.
 RTU Operation Status: 0 = communication module stop, 1 = communication module run
3) RTU Mode: (AH Series PLC acting as a Scanner)
 RTU State: 0 = communication module is working fine, 1 = communication module is NOT working fine.
 RTU Error Code: refer to Section 9.7 for more information.
 Power State:０= power error, 1 = power normal
 I/O Module State: each I/O module uses 1 bit to show its status (0 = normal , 1 = not running normally)
 I/O Module Error Code: refer to the I/O module manual for more information.
 RTU Operation State: 0 = communication module stop, 1 = communication module run

Delta AS Series Specifications

General

Series	AS Series
Power Supply	24VDC
Cooling Method	Natural convection
Programming Language	Function Block Diagram (FBD)
Communication Interface	Ethernet, RS-232, RS-485
Output Voltage	24V DC
Output Current	2A
Operating Temperature	55°C
Storage Temperature	70°C
Protection Features	Overvoltage
Certifications	CE, UL