Delta AS Series Manual

Chapter 11 DeviceNet Master Scanner Module AS01DNET-A
11-9
1
1
Product picture Model Function
IFD9502
Used for connection of the DeviceNet network and
electromechanical equipment such as
AC motor
drive, PLC, temperature controller, servo drive, HMI,
user-defined device.
IFD6503
A fieldbus data analysis tool, with one end: CAN
interface and the other end: USB interface can be
used for getting the CAN data or sending the data to
the CAN node. It is used with the Netview Builder
software together.
E-series AC motor drive
Used for connecting AC motor drive to DeviceNet
network via CME-DN01 card.
CMC-DN01
Used for connecting C2000 series AC motor drive to
the DeviceNet network.
DN-02
Used for the connection of DeviceNet network and
AC motor drive.
DVPDT01-S
Used for the connection of DeviceNet network and
S series PLC.

Delta AS Series Specifications

General

Series	AS Series
Power Supply	24VDC
Cooling Method	Natural convection
Programming Language	Function Block Diagram (FBD)
Communication Interface	Ethernet, RS-232, RS-485
Output Voltage	24V DC
Output Current	2A
Operating Temperature	55°C
Storage Temperature	70°C
Protection Features	Overvoltage
Certifications	CE, UL