Delta M70A

5 Planning the installation
Installation and Operation Manual for Solar Power Inverter M70A EU V1.1 EN 2020-02-20
28
Special instructions for mounting in a standing position
In principle, the inverter can be mounted directly onto the oor or
directly onto the roof in the case of roof systems.
However, if there is a risk of ooding (for example in heavy rain)
or snow drifts, you should place the inverter in an elevated posi-
tion.
For example, if there is a circumferential boundary wall on the
roof, it can be used for installation.
Fig. 5.25, p. 28Shows example use of mounting brackets so
that the inverter is positioned o󰀨 the ground. The cable duct is
located behind the inverter.
Fig. 5.25: Standing installation with clearance from the ground