Delta M70A

9
Installation and Operation Manual for Solar Power Inverter M70A EU V1.1 EN 2020-02-20
3 Intended purpose
3. Intended purpose
The inverter may be used only for the specied intended pur-
pose.
The intended purpose of the inverter is dened as follows:
● Use in stationary solar systems that are connected to the
public grid. For conversion of the DC power that is generat-
ed by the solar modules of the solar system into AC power
which is fed into the local power grid.
● Use in conformity with the power specications and envi-
ronmental conditions specied by the manufacturer.
The following uses are regarded as not for the intended pur-
poses:
● Use in stand-alone mode, i.e. without a connection to the
public grid. The inverter has functions that prevent isolated
operation.
● Use in mobile solar systems.