Chapter 4 Parameters|VFD-VL
4-118
11-13
Low-pass Filter Time of Keypad Display
Control
mode
VF VFPG SVC FOCPG TQCPG FOCPM
Factory Setting: 0.500
Settings 0.001 to 65.535 s
It is used to lower the blinking frequency of LCD display.
11-14
Motor Current at Accel.
Control
mode
FOCPM
Factory Setting: 150
Settings 50 to 200%
11-15
Elevator Acceleration
Control
mode
FOCPM
Factory Setting: 0.75
Settings 0.20 to 2.00m/s
2
Call 1(800)985-6929 for Sales
Call 1(800)985-6929 for Sales
To Next Page
Loading...
Need help?
General