To Next PageTo Next Page
Why is the power indicator blinking red on my Denon AVR-1612 Stereo Receiver?
If the power indicator on your Denon Stereo Receiver is blinking red every 0.5 seconds: * Ensure that you are using speakers with the correct impedance. * Check the speaker cables for any shorts (touching wires). Twist the core wire firmly and reconnect to the speaker terminal.
Why can't I play files from my USB device on my Denon AVR-1612?
If your Denon Stereo Receiver won't play files from a USB memory device: * Check that the USB device is formatted as FAT16 or FAT32. * If the USB device has multiple partitions, only files in the first partition can be played. * Ensure the files are in a compatible format. * Copyright-protected files cannot be played.
How do I turn on the display on my Denon AVR-1612 Stereo Receiver?
If the display on your Denon Stereo Receiver is off, set “Dimmer” on the menu to something other than “OFF.”
Why doesn't my Denon AVR-1612 Stereo Receiver recognize my USB drive?
If your Denon Stereo Receiver isn't displaying “USB” in the menu when a USB drive is connected: * Check the connection of the USB memory device. * Ensure the USB device follows mass storage class or MTP standards. * Connect the USB memory device directly to the USB port, avoiding USB hubs. DENON does not guarantee that all USB memory devices will operate.
General| Audio output channels | 5.1 channels |
|---|---|
| Audio A/D Converter (ADC) | 24-bit/96kHz |
| Power output per channel (1KHz@6 Ohm) | 120 W |
| Power output per channel (20-20KHz@8 Ohm) | 80 W |
| HDMI in | 4 |
| Composite video in | 3 |
| S-Video inputs quantity | 1 |
| Speakers connectivity type | - |
| Ethernet LAN | No |
| Radio Data System (RDS) | Yes |
| Preset stations quantity | 56 |
| Analog signal format system | NTSC, PAL |
| Display | LCD |
| HDMI version | 1.4 |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-ES, DTS-HD |
| Apple docking compatibility | iPod |
| Graphical user interface (GUI) language | English, French, German |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 435 mm |
| Height | 162 mm |
| Weight | 9200 g |
Check leakage current or line to chassis resistance before returning the set.
Cautions for servicing, electric shock, disassembly, designated parts, and post-service checks.
Properties of electric and structural parts are critical; use designated part numbers.
Procedure for initializing the receiver when the microprocessor or Digital PWB is replaced.
Details the button combinations to access various special modes.
Adjusting the idling current for the audio section.
Troubleshooting steps for power-related issues.
Steps to check and replace blown fuses.
Troubleshooting flowchart for no picture or sound output from HDMI/DVI.
Troubleshooting flowchart for audio output issues.
Troubleshooting steps when a USB device is not recognized.
Schematic diagrams for the HDMI part.
Schematic diagrams for the digital supply part.
Schematic diagrams for the MCU part.
Schematic diagrams for the MCU level charge part.
Critical parts indicated by a symbol require specific replacement parts.
Lists ICs with their functions and pin descriptions.
Details terminal functions for the EX3AV IC.
Details pin functions for the ADV7623 IC.
