ENGLISH
Surround Speaker
Select surround speakers use
and
size.
[Selectable items]
Large
I
Small
I
None
Surround Back Speaker
Select surround
back
speaker
use
and
size.
[Selectable items] (
Large
I
Small
I
None
)
([2spkrs
I 1
spkr
)
-N·na
By
default. the AVR-2309CI's "Amp Assign" setting
is
set
to
"ZONE2".
To
use
as
the surround
back
speaker for the MAIN
ZONE,
change the
"Amp Assign" setting
((Fpage
35).
Large
:Select this when using large speakers with ample low
frequency reproduction capabilities
Small
:Select this when using small speakers without ample low
frequency reproduction capabilities.
None
:Select this when
no
speaker
is
connected.
Yes
:Select this when a subwoofer
is
connected.
No
:Select this when
no
subwoofer
is
connected.
2spkrs
1spkr
Select the number of surround
back
speakers.
#
- Select "Large"
or
"Small" not according to the physical
size
of the
speaker but according to the low frequency reproduction capabilities
based
on
the frequency set at "Crossover Frequency"
((Fpage
31)
- When "Front Speaker"
is
set to "Small", "Subwoofer"
can
automatically set to "Yes".
-If
"Subwoofer"
is
set
to
"No",
"Front Speaker"
is
automatically set
to "Large".
-If
"Surround Speaker"
is
set to "None", "Surround
Back
Speaker"
are
automatically set to "None".
- When "Front Speaker"
is
set to "Small", "Center Speaker"
can
not
be
set to "Large".
- When using just one surround back speaker, connect it to the left
channel (SBl).
Subwoofer Setup
low
range
signal to
be
reproduced by subwoofer.
[Selectable items]
LFE
I:
Play
low
range
and
LFE
signal of channels set to
"Small".
LFE+Main
:
Play
low
range
and
LFE
signal of
all
channels
#
- This
can
be
set when menu "Speaker Configuration" - "Subwoofer"
is
set to "Yes".
-
Play
music or a movie source
and
select the mode offering the
strongest
bass.
- Select "LFE+Main" if
you
want the
bass
signals to always
be
produced from
the
subwoofer.
IJOistance
Set distance from listening position to speakers.
Before making the settings, measure the distance from the
listening position to the different speakers.
Feet I Meters
Select unit for distance.
Step
Select step. (smallest distance)
[Selectable items]
[J!!:J
O,1ft
.
Can
be
selected when "Feet"
is
set.
~
0.01m
:
Can
be
selected when
"Meters"
is
set.
Default
Resets the settings to the default values.
Distance measurement
Select the speaker
you
want to set. then set the distance.
Set the value closest to the measured distance.
[Variable range]
O.Oft
-
6O.Oft
:Display when "Feet"
is
set.
O.OOm
-18.00m
:Display when "Meters" is set.
-U'Ua
Set the distance between the listening position
and
the various
speakers to
no
more than 20.0
ft
(6.00 meters).
I
'J
For details on
how
to
select, set and cancel settings for each menu, see
"Menu
Operations"
(Gf'page
221.1
30
To Next Page
Loading...
