ENGLISH
MATRIX
VIRTUAL
VIDEO
GAME
I
Playing Multi-channel Sources
(Dolby Digital, D1S, etc.)
In
the
case
of standard playback of multi channel sources, the
AVR-
2309CI recognizes the format of the multi-ehannel audio input signal
and
automatically operates the appropriate decoder for surround sound.
[Selectable items]
STANDARD
Any
of
the surround modes
in
the "Display" column
in
the following
table,
The mode changes depending upon factors such
as
the
• Input signal
• Whether
or
not surround back speakers
are
being used,
Input signal
Display
DOLBY
DIGITAL
DOLBY DIGITAL
DOLBY DIGITAL
EX
(other than
2ch)
/
DOLBY DIGITAL+PLIIx CINEMA
DOLBY DIGITAL
EX
DOLBY DIGITAL+PLIIx MUSIC
DOLBY DIGITAL
Plus
(*
4)
DOLBY DIGITAL +
DOLBYTrueHD
DOLBYTrueHD
(*4)
DOLBY HD+EX
DOLBY HD+PLIIx CINEMA
DOLBY HD+PLIIx MUSIC
DTS
SURROUND
DTS
(5.1
ch)
/
DTS+PLIIx CINEMA
DTS+PLllx MUSIC
DTS-ES
Discrete
6.1
/
DTS+NEO:6
DTS-ES
Matrix
61
/
DTS
ES
MTRX6.1
(*
1)
DTS
96/24
DTS
ES
DSCRT6.1
(*
2)
DTS
96/24 (*
3)
DTS-HD
HI
RES
DTS-HD MSTR
DTS-HD
(*4)
DTS-HD+NE06
DTS-HD+PLIIx CINEMA
DTS-HD+PLllx MUSIC
MULTI
CH
IN
PCM
(multi
ch)
MULTI IN+PLIIx CINEMA
MULTI IN+PLIIx MUSIC
MULTI
CH
IN
71
* 1 : This
is
displayed when the input signal
is
"DTS-ES Matrix
6.1
"
and
the AVR-2309CI's
"AFDM"
setting
is
set to
"ON".
*
2:
This
is
displayed when the input signal
is
"DTS-ES Discrete
6.1
"
*
3:
This
is
displayed when the input signal
is
"DTS 96/24",
*
4:
When a signal
is
input, the
HD
AUDIO indicator lights.
For
details,
see
pages
78, 79,
45
(])
DSP Simulation Playback
The desired mode according to the program source
and
viewing
situation
can
be selected from among 7 DENON original surround
modes.
The surround parameters
can
be adjusted
(~page
76,
77)
to
achieve
an
even more realistic, powerful sound field.
Selecting
the
surround mode
Select by turning
<SELECT/ENTER>
or pressing
[SIMU]
[Selectable items]
5CH
/7CH
STEREO
* 1 This mode
is
for enjoying stereo sound
from
all
speakers
ROCK
ARENA
This mode
is
for enjoying the atmosphere
of a live concert
in
an
arena.
JAZZ
CLUB
This mode
is
for enjoying the atmosphere
of a live concert
in
a
jazz
club.
MONO
MOVIE
* 2 :This mode
is
for playing monaural movie
sources with surround sound,
This mode
is
suited for achieving surround
sound with video games.
This mode lets you
add
a sense of expansion
to stereo music sources.
This mode
is
for enjoying surround
effects using only the front speakers or
headphones,
*
1:
"5CH STEREO"
is
displayed when "Surround Parameter" - "SB
CH
our
is
"OFF",
and
"Amp
Assign"
is
set to "ZONE2"
(~page
35, 48,
49)
*
2:
When playing sources recorded
in
monaural
in
the MONO MOVIE
mode, the sound will
be
off balance with a single channel (left or
right),
so
input to both channels.
Depending
on
the program source being played, it may not
be
possible
to achieve a satisfactory surround effect.
In
this case, try other modes
to achieve a sound field suited to your tastes.
.~[.jj.
When the input signal
is
DOLBY TrueHD, DOLBY DIGITAL
Plus
,DTS-
HD
you cannot select DENON original surround mode.
® Direct Playback
Selecting the mode
Select by turning
<SELECT/ENTER>
or pressing
[D/ST].
[Selectable items]
DIRECT
In
this mode the signals bypass the tone adjustment circuitry for high
quality sound.
The sound
is
output to the same channels
as
the input signal.
Input signal
Display
Analog signal /
PCM
(2ch)
/
Dolby Digital source /
DIRECT
DTS
source /
Other 2-channel diaital sianals
MULTI
CH
DIRECT
PCM
(multi
ch)
M DIRECT + PLllx CINEMA
M DIRECT + PLIIx MUSIC
M DIRECT
71
For
details, see page
79,
®Stereo Playback
Selecting the mode
Select by turning
<SELECT/ENTER>
or pressing
[D/ST].
[Selectable items]
STEREO
This
is
the mode for playing
in
stereo.
The
tone
can
be adjusted.
Sound
is
output from the front left
and
right speakers
and
subwoofer,
To Next Page
Loading...
