Denon AVR-2309CI

ENGLISH
II Volume Limit
Make a setting for maximum volume.
Option Setup
Make vanous other settings
Volume Control
I
[Selectable items]
~: Do not set a maximum volume.
-2OdB Set the maximum volume to -20 dB.
-1OdB Set the maximum volume to -1 0 dB.
OdB Set the maximum volume to 0 dB.
D Power On Level
• Menu screen •
2. Manua I Se t up
1. Speaker Setup
2. HDMI Setup
3.Audio Setup
4. ZONE2 Setup
Ci"5.0ption Setup
1
2-5.0ption Setup
Ci" 1. Am pAs s i g n
2. Vol. Control
3.Source Delete
4.0n-Screen Display
5. Quick Select Name
6.TriggerOut
7. Remote 10 Setup
8. 232C Por t
9.Display
10. Setuo Lock
Volume Limit
Make a setting for maximum volume.
[Selectable items]
~: Do not set a maximum volume.
-20dB Set the maximum volume to -20 dB.
-10dB Set the maximum volume to -10 dB.
OdB Set the maximum volume to 0 dB.
Define the volume setting that is active when the power is tumed
on.
[Selectable items]
Last I: Use the memorized setting from the last session.
Always use the muting on condition when power
is tumed on
DAmp Assign
Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the MAIN ZONE) where
surround playback is performed (multi-zone playbackl or play the sound
with high quality using the front speakers (bi-amp connections).
This sets the volume set when the MAIN ZONE's power is tumed
on.
Power On Level
[Selectable items]
Last I· Use the memorized setting from the last session.
Always use the muting on condition when power
is tumed on.
[Variable range]
-BOdB - +18dB Set the volume level when the power is tumed on
in units of 1 dB.
FrontB Bi-Amp
[Selectable items]
7.1ch I ZONElI FrontA Bi-Amp
Set the volume level when the power is tumed on
in units of 1 dB.
[Variable range]
-7OdB - +18dB
mMute Level
Set the amount of attenuation when muting is on ..
[Selectable items]
~: The sound is cut off entirely.
--40dB : The sound is attenuated by 40 dB.
-20dB The sound is attenuated by 20 dB.
For details, see" AmpAssign / Multi-zone Connections and Operations"
(n::r page 69 - 72).
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the MAIN ZONE.
[Selectable items]
~: The sound is cut off entirely.
--40dB The sound is attenuated by 40 dB.
-20dB The sound is attenuated by 20 dB.
35 For details on how to select, set and cancel settings for each menu, see "Menu Operations" (&page 22).