ENGLISH
We
recommend setting to
"+
15dB".
•
Menu
screen •
[Selectable items]
OdB
+5dB
+10dB
I
+15dB
I
fl2ch
Direct/Stereo
Make speaker settings for 2-channel mode playback.
Do
not memorize settings. Surround mode does not change
according to input signal.
OFF
• Set this to
"ON"
if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound
is
down-mixed
and
output from the front speakers.
II
Dolby Digital Setup
Set dynamic range for downmix playback of Dolby Digital
sources.
[Selectable items]
II
Auto Surround Mode
Make setting for memorizing surround mode setting for each
input signal type.
ON
Compression
is
used. Select this if sound from front
speakers
is
distorted.
~:
Do
not use compression. This
is
the recommended
setting.
[Selectable items]
~:
Memorize settings. Most recently stored surround mode
is
automatically selected.
Select subwoofer use.
Subwoofer
Front
Crossover
Select low range signal to
be
reproduced by subwoofer.
[Selectable items]
~
LFE+Main
:Select subwoofer signal
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
~
No
:Select subwoofer use.
Subwoofer
Mode
[Selectable items]
40Hz
60Hz
180Hz 190Hz
100Hz 110Hz
120Hz 150Hz
200Hz
250Hz
:Select crossover frequency.
Select front speaker size.
[Selectable items]
I
Large
I
Small
: Select front speaker
size.
2-3.Audio
Setup
IT
1.
EXT.
I N
SW
Level
2.
2ch
Direct/Stereo
3.Dolby
Digital
Setup
4.
Auto
Surround
Mode
5. EQ
Preset
2.
Manua
I
Setup
1.
Speaker
Setup
2.
HDMI
Setup
IT3.
Aud
i 0
Setup
4. ZONE2
Se
t
up
5.0ption
Setup
D EXT. IN Subwoofer Level
Set the subwoofer level for playback.
Audio Setup
Make settings for audio playback
I
Setting
To
change the settings, select "Custom".
[Selectable items]
I
Basic
I:
Use the same settings
as
in
"Speaker Setup".
Custom
: Make separate settings for 2-channel mode.
Distance
FL
Set distance from listening position to front left speaker.
[Variable range]
O.Oft
-
6O.Oft
Distance
FR
Set distance from listening position to front right speaker.
[Variable range]
O.Oft
-
6O.Oft
-N'U-
Set the distance between the listening position and the various
speakers to no more than 20.0
ft
(6.00 meters).
•
The
auto surround mode function lets
you
store
in
the memory the
surround mode last used for playing the four types of Input signals
listed below.
CD
Analog
and
PCM
2-channel signals
(1)
Dolby Digital
and
DTS
2-channel signals
CIl
Dolby Digital
and
DTS
multi-channel signals
® Multi-channel signals other than Dolby Digital
and
DTS
(PCM,
etc.)
• When playing
in
the
PURE
DIRECT
mode, the surround mode does
not change even if the input signal
is
changed.
33
I For details on
how
to
select, set and cancel settings for each menu, see
"Menu
Operations" (D2Fpage 22).
To Next Page
Loading...
