ENGLISH
II
Source Delete
Remove input sources that are
not
used from the display.
[Selectable items]
ON
I:
Use this source.
Delete
: Do
not
use this source.
Default
Resets the settings
to
the default values.
-N·n=-
• Input sources being used
in
the various zones cannot be deleted.
• Input sources set
to
"Delete"
cannot be selected using
SOURCE
SELECT.
DOn-Screen Display
Make on-screen display related settings.
Master Volume
Master volume display during adjustment.
[Selectable items]
I
ON
I:
Turn display on.
OFF
:Turn display off.
Tuner Information
This sets the
time
the on-screen display is displayed
when
a tuner
operation
is
performed.
[Selectable items]
Always
Show display continuously.
I
30sec
I:
Show
display for 30 seconds after operation.
10sec
Show
display
for
10 seconds after operation.
OFF
: Turn display off.
iPod Information
II
Quick Select
Name
Change the Quick Select name.
Up
to
16 characters can be input.
[Input characters]
A
..
Z a
..
z 0
..
9 !# %
&.
()
*
+,
-./:;
="?
@
[\]
(space)
Default
Resets the settings
to
the default values.
II
Trigger
Out
Select the conditions to turn on the trigger
out
with
respect
to
the zone, input source, surround mode, etc. For details about
the
trigger
out
function, see page 20.
Selecting the Zone
Select the zone for
which
the trigger
out
is
set.
I
Screensaver
This sets the
time
the on-screen display is displayed
when
an
iPod [Selectable items]
operation
is
performed.
All
MAIN
ZONE2
Make screensaver settings.
Use the screensaver
to
prevent burn-in
on
the monitor screen.
When
set
to
"ON",
the screensaver
is
activated if there
is
no activity
for about
3 minutes.
[Selectable items]
ON
:Activate the screensaver if there
is
no activity for about 3
minutes.
OFF
:Turn the screensaver function off.
Text
Input source and
mode
display.
[Selectable items]
I
ON
I:
Turn display on.
OFF
:Turn display off.
[Selectable items]
Always
Show
display continuously.
I
30sec
I:
Show
display
for
30 seconds after operation.
10sec
:
Show
display
for
10 seconds after operation.
OFF
: Turn display off.
Display Mode
Select the on-screen display's display mode.
[Selectable items]
I
Mode1
I:
If there
is
no video signal, flickering
of
the on-screen
display is not prevented.
Mode2
:Prevents flickering
of
the on-screen display
when
there
is
no video signal.
Use this mode if the on-screen display does not appear
in
the
Mode
1,
as
may happen according
to
the
TV
being
used.
Setting with Respect to the Input Source
When the input source set to
on
is
selected, the trigger
out
turns on.
[Selectable items]
ON
Activate trigger on this mode.
Do not activate trigger
on
this mode.
Setting with Respect
to
the Surround Mode
• When the surround
mode
set to on
is
selected, the trigger out turns
on.
• Associated
with
respect
to
surround modes that are set to
"ON".
• This
can
be set if the
"MAIN
ZONE"
is
selected at "Selecting the
Zone".
• Associated when
an
input source for which "Setting
with
Respect to
the Input Source"
is
set
to
"ON"
is
selected.
[Selectable items]
ON
: Activate trigger
on
this mode.
: Do not activate trigger on this mode.
For details on
how
to
select, set and cancel settings for each menu, see "Menu Operations" (iGT'page
22).1
36
To Next Page
Loading...
