ENGLISH
Other
Operations
and
Functions
I
• Symbols used to indicate buttons
in
this manual
Button located
on
both the main unit
and
the remote control
unit
~
BUnON
Button only
on
the main unit
~
<BUTION>
Button only
on
the remote control unit • [BUnONj
<SOURCE
SELECT>
~
'-?-------r~---.-----.-'
<ZONE2/REC
SELECT>
61
Other Operations
Recording on an External
Equipment
(REC
OUT
mode)
You
can
listen to one program source while recording a different
program source.
1
Press
<ZONE2/REC
SELECT>.
"ZONE2 SOURCE"
is
shown
on
the display.
ZONE2
SOURCE
---
ZONE2
TUNER
---
....
---
ZONE2
SIRIUS
* *
RECOUT
SIRIUS
---
...
---
RECOUT
TUNER
---
RECOUT
SOURCE
2
Turn
<SOURCE
SELECT>
until "RECOUT Source" is
displayed.
The
......
indicator lights.
3
Turn
<SOURCE
SELECT>
to choose the input source
to be recorded.
4
Play the program source.
For
operating instructions, refer to the respective equipment's
operating instructions.
To
record FM or AM broadcasts. select the broadcast (!2iFpage
55).
5
Start recording.
For operating instructions, refer to the respective equipment's
operating instructions.
"
-
To
cancel. press
<ZONE2jREC
SELECT>.
then turn
<SOURCE
SELECT>
until "ZONE2 Source"
is
displayed.
- Make a test recording before starting the actual recording.
- Sources selected
with
the
REC
OUT mode
are
output from ZONE2
as
well.
-In
the
REC
OUT mode, the remo e control unit's ZONE2 mode
buttons cannot
be
operated.
- The
"XM"
and
"SIRIUS" digital audio output signals are not output
from the OPTICAL2 output connector.
- The source selected for ZONE2
is
output from the digital output
connector (OPTICAL
21
.~[.jj.
- Digital signals
are
not output from the analog
REC
OUT connector.
- Recordings you make are for your personal enjoyment and should
not
be
used for other purposes without permission of the copyright
holder.
-Input
sources for which "Delete"
IS
selected at "Source Delete"
cannot
be
selected.
To Next Page
Loading...
