i/p
Scaler
Make settings for i/p scaler function.
[Input source] I
OVO
I
LB~
[----rvtCBLll
VCR
II
V.AUX
I
ENGLISH
Progressive
Mode
Select optimum progressive mode for video material.
[Input source] I
OVD
I
!HOP]
[TWCBi]
I
VCR
II
V.Aai!J
[Selectable items]
I A
to
HI:
Use i/p scaler function for analog video signal.
OFF
:
Do
not use i/p scaler function.
-N·n.
When the "Convert" setting
is
"OFF':
you
cannot set "i/p scaler':
Resolution
Make settings for resolution of HDMI video output signal.
[Input source] I
OVO
I
[HOP
liN/cOL
I
rveR]
I
V.AUX
I
[Selectable items]
Auto
I:Detect monitor panel resolution
and
automatically set
output resolution.
480p1576p
:Output at 480p/576p resolution.
1080i
:Output at 1080i resolution.
720p
:Output at
nop
resolution.
1080p
:Output at 1080p resolution.
This
can
be
set
when"
i/p Scaler"
is
set to
"A
to H
':
-N·n.
-It
is
not possible to convert "1080i" signals into
"720p"
format.
-It
is
not possible to convert
"nop"
signals into "1080i" format.
[Selectable items]
Auto
I:
Automatically detect video material type.
Vide01
:Select mode suitable for video playback.
Vide02
:Select mode suitable for video
and
30-frame film material
playback.
This
can
be
set when "i/p Scaler"
is
set to
"A
to H':
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
[Input source]
OIVDJ
I
HOP
I
[TW£BiJ
I
VCR
II
V.AUX
I
[Selectable items]
Full
I:
Output at 16:9 aspect ratio.
Normal
:Output at 4:3 aspect ratio.
This
can
be
set when "i/p Scaler"
is
set to
"A
to H
':
For details on
how
to
select, set and cancel settings for each menu, see "Menu Operations"
(~page
22).1 40
I
To Next Page
Loading...
