12
! Ir-Transfer Utility E (option)
Running on the host PC, this utility transfers files between the BHT and the host PC. It uses the BHT-Ir
protocol as a file transfer control procedure. (For the details about the BHT-Ir protocol, refer to Chapter 3,
Section 3.4.2.)
To transfer files under any of the following conditions, use Ir-Transfer Utility E:
- Via an external IR transceiver
- Via an IrDA interface port integrated in a PC
! Transfer Utility (option)
Running on the host PC, this utility transfers files between the BHT and the host PC. It uses the
BHT-protocol as a file transfer control procedure. (For the details about the BHT-protocol, refer to
Chapter 3, Section 3.4.1.)
To transfer files under any of the following conditions, use Transfer Utility:
- When the BHT is placed on the CU-8001/8002/8021
- Via the direct-connect interface of the BHT
To Next Page
Loading...
