38
(5) Completion of initialization
Upon completion of the initialization, the BHT displays the screen
shown at left for a second and turns itself off automatically.
• Do not turn the BHT off until the above initialization completion screen appears. A too-earl
turning-off will interrupt initialization, requiring you to initialize the BHT again.
• If the message "Contact your administrator. Note the error number. (2XXX)" a
pears although the
initialization has completed, you need to initialize the BHT again.
• If you initialize the BHT after downloading user programs and data, all of those programs and dat
stored in the target memory area will be lost. Download them again if necessary.
• Initialization will restore the LCD contrast level (refer to Section 2.3.3), communications
conditions and other settings to the default values, so modify them if necessary. After initialization,
be sure to set the calendar clock (refer to Section 2.3.2).
To Next Page
Loading...
