EasyManua.ls Logo

Denso BHT-8000 - Page 64

Denso BHT-8000
219 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Getting Started the BHT and System Mode
51
If an error occurs during downloading
If some error occurs during downloading, the BHT beeps three times and shows one of the following
screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.
! Problem
The memory is insufficient for storing files to be downloaded.
! Solution
Press the 2 key to return to the SYSTEM MENU, then delete
unnecessary files in the memory or decrease the size of the file to be
downloaded. (Refer to Section 2.5.3, [ 8 ] and [ 2 ].)
! Problem
The current download will exceed the maximum of 80 files in the
memory.
! Solution
Press the 2 key to return to the SYSTEM MENU. Delete unnecessar
y
files in memory or decrease the number of files to be downloaded i
f
you attempted to download more than one file (Refer to Section 2.5.3,
[ 8 ] and [ 2 ].)
! Problem
Downloading has failed.
! Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key. Check the interface
port and communications parameters in the SET SYSTEM menu o
r
perform the communications test in the TEST menu. (Refer to Section
2.5.3, [4.5] and [5.7].)
It is also necessary to check the communications parameters setup o
f
the host PC.

Table of Contents

Other manuals for Denso BHT-8000

Related product manuals