8
Telephony Functions Factory Settings on Delivery
■ External line access: interna-
tional numbers can be dialled
from all telephones. External
lines must be seized by dialling
“0” (“9” in the United Kingdom).
■ Least Cost Routing is not precon-
figured and therefore not active.
As soon as LCR is configured, the
users can make calls via individ-
ually selected call-by-call pro-
viders.
■ VIP call is activated.
■ Announcements to system ter-
minals are possible.
■ Baby calls can be set up.
■ Pickup and selective pickup of
calls from other telephones are
activated.
■ The completion-of-calls to busy
subscribers feature can be acti-
vated.
■ If more than one terminal is con-
figured for a user under the
same number, he can suppress
the signalling of calls on the par-
allel terminals.
■ Call-forwarding to internal or
external numbers can be acti-
vated. Call forwarding on no re-
ply is executed after 10 seconds.
■ It is possible to transfer an exter-
nal call to an external subscriber.
■ Three-party conferences can be
set up.
■ Call and call-waiting protection
are deactivated.
■ The transmission of ones own
call number (MSN or system ac-
cess number) to the display of
the external party’s terminal is
activated, but can be restricted.
■ Interception of malicious callers
is possible if this feature has
been ordered from the network
operator.
■ The telephone lock can be acti-
vated. The terminal PIN is
“0000.”
■ Speed-dialling is possible if this
has been configured in the
OpenCom 100 central tele-
phone book.
■ The black- and whitelists are not
preconfigured and thus not ac-
tive. If these lists are configured,
they can be activated for the
user groups.
■ The door opener can be acti-
vated from all terminals. Door
calls can be forwarded.
■ Keypad dialling can be used.
■ Every user can change the con-
figuration of the OpenCom 100.
To Next Page
Loading...
