40
OpenCom 100 in Computer Networks Configuration Examples
Configuration Examples
OpenCom 100 in Computer Networks
One of the outstanding features of
the OpenCom 100 is the integration
of telephony and computer net-
works. Connect the OpenCom 100
via a computer network (LAN, Local
Area Network) with suitably config-
ured workstations, and you can use
the OpenCom 100 network features
from these workstations. Using a
Web browser you can access:
■ the OpenCom 100 Configurator
■ the VirtualPhone, with which
the functions of the telephones
can be used on a PC
■ the OpenCom 100 system tele-
phone book
■ call charge administration.
In addition, the OpenCom 100 can
be used as an Internet access server.
RAS access can also be achieved us-
ing the OpenCom 100, which ena-
bles the integration of external staff
in the LAN.
In this chapter you will find several
examples of configurations showing
the integration of the OpenCom 100
in a LAN. Which example applies to
your situation depends on the size
and properties of the existing or
planned LAN infrastructure.
The following LAN prerequisites are
possible:
Server Configuration in the LAN OpenCom 100 Functions
No IP server present OpenCom 100 functions automatically as DHCP
and DNS server
IP server present
DHCP server present
OpenCom 100 functions automatically as DHCP
client
System Administrator must assign IP address
and DNS name for OpenCom 100
IP server present
No DHCP server present
Special case when integrating the OpenCom
100 in a LAN; settings in menu
NET Configuration: Easy Access must be
coordinated with the responsible System
Administrator
To Next Page
Loading...
