6
Telephony Functions Factory Settings on Delivery
Factory Settings on Delivery
The following basic settings and
features are active on delivery. We
recommend that you configure the
OpenCom 100 to your individual
requirements before putting it into
operation (see Configuration starting
on page 24).
Telephony Functions
OpenCom 105
■ The S
0
1 port is configured for
multi-terminal access, the S
0
2
port for system access.
■ The S
0
3 and S
0
4 ports are con-
figured as internal S
0
buses with
the call numbers 20 and 21.
■ The four U
pn
ports are config-
ured for OpenPhone 63 system
telephones with the call num-
bers 30 to 33.
■ The four a/b ports are config-
ured for analogue devices with
the call numbers 10 to 13.
OpenCom 110
■ The S
0
1 port is configured for
multi-terminal access, the S
0
2
port for system access.
■ The S
0
3, S
0
4 and S
0
5 ports are
configured as internal S
0
buses
with the call numbers 20 to 22.
■ The eight U
pn
ports are config-
ured for OpenPhone 63 system
telephones with the call num-
bers 30 to 37.
■ The four a/b ports are config-
ured for analogue devices with
the call numbers 10 to 13.
To Next Page
Loading...
