DETEWE opencom 100 - Internet Functions

9
Factory Settings on Delivery Internet Functions
■ Every user can create a personal
telephone book and dial num-
bers from the central telephone
book.
■ Every user can read out the
charges.
■ Every user who has a workplace
PC can use VirtualPhone to
make calls, manage calls and
messages, and use entries from
both the central and personal
telephone books.
Internet Functions
■ RAS access (with or without call-
back) can be set up for every
OpenCom 100 user. RAS access
requires activation of the RAS
authorisation.
■ More than one mail account
check can be set up for every
user.
■ Every user with a system termi-
nal can be informed automati-
cally of the receipt of e-mails.
■ Users can disconnect existing In-
ternet connections from a sys-
tem terminal, if this function has
been configured on the system
terminal.
The following IP addresses are pre-
set for the network configuration:
■ Host name: host
■ IP address: 192.168.99.254
■ Network mask: 255.255.255.128
The following addresses are trans-
mitted to the client PCs in the LAN
via DHCP or PPP:
■ Gateway address:
192.168.99.254
■ Domain name: domain
■ Domain name server:
192.168.99.254
■ PPP addresses: 192.168.100.0 to
192.168.100.10
■ DHCP addresses: 192.168.99.129
to 192.168.99.254
You can change the IP settings in the
Configurator. Check with the Net-
work Administrator responsible for
the LAN if you wish to do this.