24
LAN Integration Configuration
Configuration
Configuration and programming of
the OpenCom 100 is performed by
the Configurator, a special software
integrated in the system. The Con-
figurator is operated via the Web
console, which can be run on any PC
connected to the OpenCom 100.
Using the Web console, you can:
■ perform the initial configura-
tion of the OpenCom 100,
■ Configure users for the Open-
Com 100, and authorise them to
use certain system services,
■ carry out further system mainte-
nance,
■ use PC-supported telphony
functions
■ read out call charge information,
■ access the OpenCom 100 tele-
phone book.
The Web console has an integrated
online Help function, which offers
comprehensive information on the
configuration and maintenance of
the OpenCom 100.
The Web console of the OpenCom 110
To Next Page
Loading...
