Devatec ELECTROVAP MC2 - Installation - Step 1: Wall Mounting; Wall Mounting Tips and Clearances

11 Pictures for illustrating purposes only
ELECTROVAP MC2 STEAM BATH
Installation - Step 1
Installation tips :
The steam generator should be operated within 5°C and 40°C in a room with less than 80% of
humidity.
When in operation, the rear panel becomes hot (60°C) so do not hang the generator on a heat
sensitive surface.
The devatec steam generators have been developped to be hanged on wall. Before
installation, make sure that the surface material is strong enough to hold the steam bath.
Consider free space around the generator to allow easy access for maintenance purposes
(s.a. here under sketches).
How to install the humidifier on wall
600 mm
600 mm mini
500
m
m
m
in
i
1000
m
m
m
in
i
1250 mm