19 Pictures for illustrating purposes only
ELECTROVAP MC2 STEAM BATH
Installation - Step 6
RECOMMENDATION:
All works concerned with the electrical installation must be carried out by skilled
and qualified personnel (eg electrician with appropriate training). The customer
is responsible for ensuring their suitability. Please observe local regulations
concerning the provision of electrical installations.
Check all electrical terminal screws at commissioning, after 50 hours operation
and at every service thereafter.
Take care : the ElectroVap MC2 Steam Bath electronic components are very
sensitive to electrostatic shocks. Appropriate steps must be taken before any
operation.
To Next Page
Loading...