Develop ineo 210 - 8.2 Utility Mode function setting procedure

Field Service Ver. 1.0 Apr. 2005 8. Utility Mode
69
ineo 161 ineo 210
Adjustment / Setting
8.2 Utility Mode function setting procedure
8.2.1 Procedure
1. Press the Utility key.
2. The Utility mode screen will appear.
8.2.2 Exiting
• Press the Panel Reset key.
8.2.3 Changing the setting value in Utility Mode functions
• Select the appropriate item using [ ▲ / ▼ ] key, [ < / > ] key, or the 10-Key Pad.
• Select the setting value using [ ▲ / ▼ ] key, [ < / > ] key, or the 10-Key Pad.
1. Validate the selected setting value using the [Yes] key.
2. To go back to the previous screen, press the [No] key.
8.3 Setting in the Utility Mode
8.3.1 MACHINE SETTING
• MACHINE SETTING is used to set the operating environment.
A. AUTO PANEL RESET
B. ENERGY SAVE MODE
C. AUTO SHUT OFF
Purpose/Use To set the time it takes the Auto Panel Reset function, which resets the panel settings
when the set period of time elapses after a copy cycle has been completed or the last
key operated, to be activated.
Setting/
Procedure
• The default setting is “1 min.”
OFF
ON : 0.5 “1” 2 3 4 5
Purpose/Use To set the time it takes the copier to enter the Energy Saver mode after a copy cycle
has been completed or the last key operated.
Setting/
Procedure
• The default setting is “15 min.”
Setting range: 1 to 240 min.
Purpose/Use To set the time it takes the Auto Shut OFF function, which shuts down the copier when
the set period of time elapses after a copy cycle has been completed or the last key
operated, to be activated.
Setting/
Procedure
• The default setting is “OFF.”
“OFF”
ON
Setting range: 15 to 240 min.