DEVO-7 Page 142 of 170
2）Aileron setting
2.1）Pos 0 setting: same as “1.1, 1.2 Pos 0” setting.
2.2） Pos 1 setting: same as “1.3, 1.4 Pos 0” setting.
3)Throttle stick setting
The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle
stick.
Setting: After finished the aileron setting, press DN button to go to throttle stick setting.
Press R or L button to set the position amount of throttle stick. The default setting is
Inhibit. The adjustable range is 0.0-100.0%.
4)switch setting
After setting the aileron, press DN button to “switch” setting interface. Current status
will be shown.
To Next Page
Loading...
