DEVO-7 Page 27 of 170
flashing. Press ENT to confirm and press EXT to exist after finished.
1.4（CALIB）
Press “ENT” key to get the flashing main memu. Press UP and DN keys until “CALIB”
becomes flashing, then press “ENT” key to Stick Calibration setting menu. After
pressing ENT key, you will get the below interface:
Stick calibration: Clockwise or counter clockwise mechanically move the right stick
and left sticks from minimum levels to maximum levels several times, and then return
the sticks to the neutral positions, respectively.
When you get the below interface after pressed ENT key, it shows the calibration is
successful.
To Next Page
Loading...
