DEVO-7 Page 60 of 170
2)Elevator mix adjustment
After AILE mix setting complete, press DN button until get ELEV mix setting interface.
If the “swash type” is 3 servos or more (refer to “2.12 Swash Type”), the setting
is the same as above.
3)Pitch Mix Adjustment
If the “swash type” is 2 servos or more (refer to “2.12 Swash Type”), the setting
is the same as above.
4）Exponential Curve
When the function is ON, the dual rate is adjustable in the “Dual rate and exponential”
under “function menu”.
Setting Method: After PITCH mix setting complete, press DN button to get into EXP
setting interface. Press R or L button to get “ON” and “OFF” options. The default
setting is “OFF”, but it is suggested to be “ON”.
To Next Page
Loading...
