Dexcom ONE+ - Next Sensor Session; Sensor Transition

11 • Next sensor session | Dexcom ONE+ User Guide
50
11 • Next sensor session
Each sensor session lasts up to 10days with a 12-hour grace period at the end. The grace period gives you more time to
replace your sensor, so you can do it when it's convenient for you. The time left in the grace period shows on your screen.
During the grace period, your sensor continues to work as it did during the sensor session.
You'll get alerts letting you know your sensor session or grace period will end soon. You can choose to wear the sensor until
the grace period ends, or you can end the session early.
To find out how much time you have left in your sensor session, go to:
l
App: Connections > Sensor
l
Receiver: Menu > Information > Sensor > Sensor info
The 12-hour grace period begins when the sensor expires.
Sensor transition
You must end the sensor session or grace period before you start a new sensor. You can end it two ways:
l
Automatically, when the grace period ends (you'll get an alert letting you know)
l
Manually, before the grace period ends
You only need to end your sensor session on one display device.
Automatically: End sensor when grace period ends
At the end of the grace period, you'll get the Replace sensor now alert:
App Receiver What it means
OK
Grace period expired. No readings or
alerts until you start a new sensor.
Replace sensor now
Replace sensor now
Grace period expired.
No readings or alerts until
you start a new sensor.
Start new sensor
Dismiss
App: Tap OK and follow instructions on the
screen.
Receiver: Select Start new sensor and follow
instructions on the screen.
Manually: End sensor before grace period ends
App
What you see What it means
Stop sensor session
Replace sensor
Sensor
3 days left
Sensor
Insertion time
Sensor expires 19/10/24, 12:36
9/10/24, 12:37
Connections
To end your session early from the app, go to Connections > Sensor.
Tap either:
l
Replace sensor: If you want to start a new sensor immediately
or
l
Stop sensor session: If you want to stop this sensor without starting a new one
Then, follow the instructions on the app screens.