C • Professional use instructions | Dexcom ONE+ User Guide
68
C • Professional use instructions
This section is for healthcare providers.
Introduction
Dexcom ONE+ supports multi-patient use. You just:
l
Prepare Dexcom ONE+ for your patient.
l
Explain Dexcom ONE+ to the patient.
l
Set up Dexcom ONE+ with the patient.
l
Follow up with the patient to share insights on their glucose trends, patterns, and statistics.
This helps both of you manage their diabetes better. The following sections go through each step and give you resources to
share with your patients as you guide them through a sensor session.
Prepare Dexcom ONE+ for patient
Professional Use Dexcom ONE+ patients:
l
Must carry their receiver so it records their data for later analysis
l
Get alerts
Go to dexcom.com/clarityapp, choose your country, and select the Healthcare Professional option for instructions for
resetting the receiver and more (may not be available in all regions).
Follow the instructions between patients to prepare the receiver:
Step 1: Charge and reset
l
Charge receiver
l
Reset:
l
Resetting the receiver removes the previous patient’s data. To ensure patient privacy, reset the receiver after each use.
Step 2: Clean and disinfect
l
Go to the Maintenance section of the Taking care of your Dexcom ONE+ appendix.
Explain Dexcom ONE+ to patient
This table shows what to explain to your patients and where you can find patient-centered information to help them
understand.
Explain Show
Dexcom ONE+ basics See Setting up your Dexcom ONE+
Dexcom ONE+ components See Setting up your Dexcom ONE+
How to charge receiver Tell the patient how to charge the receiver, and give them the charger,
USB cable, and power adapter (if necessary).
To Next Page
Loading...
