Dexcom ONE+ - Safety and Regulatory Markings

F • Technical information | Dexcom ONE+ User Guide
75
Sensor with built-in transmitter and receiver product specifications
Model
Dexcom ONE+
sensor/transmitter
Dexcom receiver
Glucose Range 2.2–22.2mmol/L N/A
Useful Life Up to 10days 3years for typical use
Sterilization Ethylene Oxide gas N/A
Memory Storage Minimum 24 hours of glucose data 180days of glucose data
Data Backfill for User
Display
24 hours
Power Source Internally/battery powered Internally/battery powered,
rechargeable; AC mains powered
Battery Longevity (Typical) Sufficient to support 10-day wear
period with a 12-hour grace period
7days
Battery Charging Time Non-rechargeable Approximately 3hours
Operational Temperature Temperature:
10°C–42°C
Temperature:
0°C–40°C
Operating and Storage
Humidity
Humidity:
10%–90%RH
Humidity:
10%–90%RH
Storage Temperature Temperature:
2°C–30°C
Store sensors in a cool, dry place
Temperature:
0°C–40°C
Operating and Storage
Altitude
-382meters to 5,000meters -382meters to 5,000meters
Ingress Protection IP58: Protected from ingress of dust;
Protected from submersion in the
water up to depth of 2.4meters for
24hours
IP54: Protected from ingress of dust;
Protected from splashing water in any
direction
Applied Part Type BF applied part No applied parts
Alert Audible Output N/A 50dBA at 1meter
TX/RX Frequencies 2.402–2.480 GHz
Bandwidth 1.07MHz 1.39MHz
Maximum Output Power 1.0mWEIRP 7.4mWEIRP
Modulation Gaussian Frequency-Shift Keying
Data Rate 1Mbps
Data Communication
Range
6meters
The maximum surface temperature of Applied part = 43°C.