11.1.5.1.Program Currencies
To program the currencies, proceed as follows:
1. Press MENU (2 seconds) 7 1 5
2. Enter the change from the local currency to the chosen
currency. There are 7 fixed exchange rates as shown in
Table above. In the case of choosing one
programmable, also introduces the identification of it. To
move from one currency to another press X, F1 or F2.
3. After passing the 9 currencies, is possible to assign the
currencies which we are going to work with, filling the
fields D1 and D2. If you only want to work with a coin,
the other will not have assigned the identifier (from 0 to
9) in any currency.
4. Having programmed all the values, press MENU 2
seconds to quit programming.
11.1.5.2.Currencies on labels
There are 6 currency sections for programming in label
formats.
For each of the two possible active currencies, it is possible
to print: one fixed text: “CURRENCY 1” or “CURRENCY 2”,
the sum of the programmed currency, and the currency
symbol.
Sections Description
129 “CURRENCY 1”
130 “CURRENCY 2”
131 Amount Currency 1
132 Amount Currency 2
133 Symbol Currency 1
134 Symbol Currency 2
To Next Page
Loading...
Need help?
General
