4.1.1.Consulting active vendors
Once in the Registering Vendors screen,
1. Press T/FT: the keys of the active sales assistants will display
in groups of 5 in the first line (for example, sales assistants 1,3
and 4). The code associated with each sales assistant
displays in the second line.
2. Press the X key to move to the following group of five 5 sales
assistants.
3. Use the +
++
+ and −
−−
− keys to move forward or backward to view
the sales assistants.
4. Press MENU return to normal working mode.
In order to change the code or name of a sales assistant,
they must first be removed and then registered.
4.1.2.Training model
The DIBAL 500 Range scale has a special working mode for
training new sales assistants.
In this working position, the transactions carried out are not
accumulated in the scale’s totals, and the receipts issued include
this line of text:
*** Training mode ***
ENTER TRAINING MODE
1. Make sure the scale is set up as MASTER, and enter the
Registering Sales Assistants screen
2. Press the key of the sales assistant you wish to be trained (for
example V4), this sales assistant must already have been
registered.
3. Select training mode by pressing the subtotal ◊
◊◊
◊ and ∗
∗∗
∗ keys:
the symbol E will display.
4. Press MENU
to quit.
QUIT TRAINING MODE (NORMAL MODE)
Remove the vendors.
To Next Page
Loading...
Need help?
General
