Dibal Mistral M-525 User Manual

USER´S MANUAL
49-M500WMEN25
16
◊
◊◊
◊
V1
◊
◊◊
◊
1
V1
SUBTOT SALES AS.
0.000
0.00
0.000
0.00
SUBTOTAL LEVEL 1
0.000
0.00
0.000
0.00
2.3.17.Totals labels
With this procedure it is possible to issue a label with the totals of
the previously issued labels.
There are two modes of operation:
2.3.17.1.Normal Accumulation Label
After issuing several labels, you can request a label with the totals
of the previous operations. To do this:
1. Working in label mode, Press ◊
◊◊
◊ .
2. Press the key of the sales assistant who effected the
operations.
In this case, the totals will be calculated from the labels issued
from this memory key since the last time a totals label was
printed.
2.3.17.2.Totals Label For One Article
The weight and amount values will be accumulated for one
particular code. If a different code is selected, totals accumulated
until then will be reset to zero. To select this accumulation mode,
review parameter (See sect .5.1.4.1. ONE ARTICLE). To do this:
1. Press ◊
◊◊
◊ .
2. Press the key of the sales assistant who effected the
operations.
2.3.17.3.Totals Levels
The 500 Range scales have three totals levels. When a totals
label is printed for one level, the data automatically accumulates
on the totals label on the next level up.
Each accumulated level has an associated label format and EAN
code format.
To select the totals level, proceed as follows:
1. In label mode, press ◊
◊◊
◊ ,
2. Press the 1 2 3 keys to select the level accumulated you
are looking for (level 1 press 1 level 2 press 2 level 3 press
3)
3. Finally press the sales assistant's key.
If there is not EAN TOTAL CODE defined, is taken the label
default value “Ean-13 format label”
If the article is not changed at accumulation level 1, the label fields
that correspond to the PLU itself (code, name, price, etc.) will
show PLU data.
In this case too (even if the article is not changed) level 1 labels
will show the expiry date even if “One article” is not set to 1 ART
OBL (See sect. 5.1.4.1. ONE ARTICLE).
However, if the article has changed, nothing will be shown in
these fields, except in the name field, which will show
"Accumulated total".
If parameter "One article" has a value of 1 ART OBL, then plu
data will be shown at all levels. Furthermore, in this case, when an
article is changed, the accumulative totals at all three levels will be
deleted.

Dibal Mistral M-525 Specifications

General

Brand	Dibal
Model	Mistral M-525
Category	Scales
Language	English