11.1.6.Date and time [ 7 1 6 ]
This function allows you to change the date and time of the
scale’s internal clock.
Proceed as follows for programming:
1. Press MENU (2 seconds) 7 1 6
2. Use the numeric keyboard to enter the date and time.
The date is shown in the ‘dd/mmm/yyyy’ format and the
time in the ‘hhmmss’ format. Press ∗
∗∗
∗ to pass to another
filed.
3. Having programmed all the values, press ∗
∗∗
∗ to save it
and MENU 2 seconds to quit programming
11.1.7.Programming Euro [ 7 1 7 ]
The different stages of the euro are programmed.
STAGE 1: (1/January/1999 to 31/December/2002): the
exchange rate for the Euro is fixed. The main currency will
be that of each member country with the EURO as a
SECONDARY currency.
STAGE 2: (1/January/2002 to 28/February/2002): the main
currency of each country will become the secondary one
while the EURO will become the MAIN one in all countries.
STAGE 3:(from Tuesday, March 1, 2002): the EURO will
be the SINGLE CURRENCY.
Once the scale has been set up in the correct stage of the
EURO, it will be capable of working and issuing receipts
and/or self-adhesive labels with the amounts in EURO.
Remember the following:
If, at stage 1, you wish to see the price and the amount
in EURO, press the SHIFT and F1 keys. At stage 2, the
amounts will be shown in local currency..
In order to display on screen the value of the exchange
rate of the EURO with regard to the local currency as well
the EURO STAGE (1, 2 or 3) in which the scale has been
set up, just take the following steps:
1. Switch on the scale, ensure it has been set up as
master, and press MENU 2 seconds
2. Select parameter 7 1 7
, Programming Euro.
3. The rate of exchange of the euro will display.
Type the following code:
Stage 1 - Stage2 ⇒ 6022
Stage 2 - Stage 3 ⇒ 9808
• The following message displays: CHANGE TO
STAGE X?
• Press ∗
∗∗
∗
• Repeat the necessary code.
• Press ∗
∗∗
∗
• Press MENU 2 seconds to quit programming menu.
To Next Page
Loading...
Need help?
General
