4.3. CASH DRAWER OPERATION [ 2 3 ]
The 500 Range weighing scales permit joint operation with a cash
drawer. To do this, a connection cable is required, and this
operation mode must be activated (See sect .5.1.7.5 CASH
DRAWER CONTROL). For cash drawer operation:
1. Check that the scales are the MASTER, press MENU (2 sec)
Enter the access code to the vendor configuration 2 3.
2. If you wish to DEPOSIT money in the cash drawer at any time
during the day, press 1
3. If you wish to WITHDRAW money from the cash drawer at
any time during the day, press 2.
4. Enter the amount of the operation performed (deposit or
withdrawal) on the weighing scales using the number keys. In
the event of error, use C to delete.
5. Press ∗
∗∗
∗ to validate data: the weighing scales will be updated
and the cash drawer will open automatically
In order to control the cash drawer BALANCE, it is possible to
issue a corresponding list in which totals are printed according to
forms of payment and cash drawer balance.
It is possible to open the cash drawer in normal operation
mode (position 0) in the receipt issue phase, by pressing +
++
+ at
any time after having pressed ∗
∗∗
∗ or ◊
◊◊
◊ .
To Next Page
Loading...
Need help?
General
