To replace adhesive paper :
1. Open the cover of the machine.
2. You will then see three blue levers. Turn the lever on the bottom anticlockwise to release the cartridge.
3. Remove the cartridge roll to change the paper
Having removed the cartridge, you must open the other two levers in order to remove the old paper holder
and remove the remaining cardboard.
4. Put the new reel of labels in its place within the cartridge and slip the paper through as shown in the
photograph. Be careful to place the paper on top of the label holder and to line it up with the paper guide
5. You then place the top on the cartridge and close the two levers This part is not necessary in the case
of some label formats.
6. The cartridge looks like that in the photograph.
7. Last of all, place the cartridge in the scale and turn the lever on the bottom clockwise.
2
3
4 5
6 7
To Next Page
Loading...
Need help?
General
