6. Proceed to programme the type of article. Articles may be of
the following types: price/Kg. (WEIGHT), unit price (UNIT),
fixed weight (FIXED W.) o.
Use C to select type of article desired:
- WEIGHT. Type of article by default; the price per kilo will
be programmed, and the amount will be the weight of the
product multiplied by the price. The article must be
weighed by the scales.
- UNIT. The amount is the price of the article. The weight
and the unit price are not printed. The article does not
have to be weighed.
- REFUND. The amount for this type of article will be
discounted from the total sum, and the amount will be
shown on the display as a negative value. This amount
will also be printed on the receipt.
- FIXED WEIGHT. The amount will be the product of the
known weight of the article that has been entered when
programming the TARE field, multiplied by the price. The
article will not be weighed, but the weight and price will
both be printed.
- A FIXED WEIGHT PLU (FROZEN) appears on the
display as a WEIGHT-type PLU, but the difference is that
instead of the tare appearing in the bottom left-hand
corner of the display, the text PF appears, indicating that
the weight is fixed, and therefore the weight placed on
the platform is not taken into consideration.
- PERCENTAGE TARE: The article must be weighed, but
a percentage of the weight will be discounted from the
gross weight, representing the tare. The percentage is
programmed in the section on Tare %, which appears
later, in the point 17.
Press X to proceed with defining the section parameter.
7. Enter the section code to which the article belongs (from 0-
99) with the number keys.
Press X to proceed to define the label format of the article
8. Enter the label format that is to be used to print the label of
the product that is being edited. You can enter a value
between 0 and 30* can be entered, with the following
meanings:
- From 0 to 20: predefined formats; See APPENDIX:
PROGRAMMED LABEL FORMATS, to select on of these
formats. All these formats will be given in the current EURO
phase.
- From 21 to 30*: user-definable formats.
*According to model.
• Models: W-015 & M-515 Maximum 25
• Models: W-025 & M-525 Maximum 30
The printing parameter GLOBAL LABEL FORMAT must be set to 0 in
order to programme the above (See sect. ¡Error! No se encuentra el origen
de la referencia.. PRINTING PARAMETERS ).
Press X to proceed to define the barcode format.
To Next Page
Loading...
Need help?
General
