5.1.3.9. Deleted lines
[ 3 3 9 ]
This parameter shows how to print and send to a pc lines that
have cancelled from a receipt. Deleted lines will be shown in
inverted video, regardless of how they are printed later. Possible
values are:
‘0’ – Cancelled lines:
Are not printed on the receipt with the word “CANCELLED”.
Are not counted in the number of articles on the receipt.
Do not blink on the screen when cancelled.
Are not sent to the PC in the “Immediate Sales” register.
‘1’ – Cancelled lines:
Are printed on the receipt with the word “CANCELLED”.
Are counted in the number of articles on the receipt.
When cancelled, these are shown as a negative value on
the display.
Are not sent to the PC in the “Immediate Sales” register
‘2’ – Cancelled lines:
Are not printed on the receipt with the word “CANCELLED”.
Are not counted in the number of articles on the receipt.
Appeared blinking on the display when cancelled.
Are sent to the PC in the “Immediate Sales” register
‘3’ – Cancelled lines:
Are printed on the receipt with the word “CANCELLED”.
Are counted in the number of articles on the receipt.
When cancelled, these are shown as a negative value on
the display.
Are not sent to the PC in the “Immediate Sales” register.
‘4’ – Receipt lines cannot be cancelled
5.1.3.10.Receipt rounding off
[ 3 3 10 ]
This parameter is for activating or deactivating rounding off the
total amount of the receipt. Rounding off is performed on the total
amount after any discount has been applied on the total (where
applicable). The following criteria is used:
Amounts that are multiples of 5 cents are left as such.
Other amounts are rounded off to the nearest multiple of 5
cents
3 lines will be shown:
Total (before rounding off)
Rounding off (up or down)
Rounded total
In the case of a secondary currency, only the total after rounding
off will be given.
Possible values for this parameter are:
’NO’ – Without rounding in the receipt
’YES’ – Rounding in the receipt
(To configure the sale of stamps: See sect. 5.3.10. LOYALTY
STAMPS)
To Next Page
Loading...
Need help?
General
