Interfaces Wireless Wide Area Networks (WWANs)
IX10 User Guide
83
d. Create a label for the action:
(config network interface my_wwan surelink actions 0)> label string
(config network interface my_wwan surelink actions 0)>
e. Set the type of recovery action. If multiple recovery actions are configured, they are
performed in the order that they are listed.
(config network interface my_wwan surelink actions 0)> modem_action
value
(config network interface my_wwan surelink actions 0)>
where value is one of:
n
update_routing_table: Increases the interface's metric to change the default
gateway.
If update_routing_table is selected, complete the following:
l
Set the number of attempts for this recovery action to perform, before moving
to the next recovery action:
(config network interface my_wwan surelink actions 0)> max_
attempts int
(config network interface my_wwan surelink actions 0)>
The default is 3.
l
Set the amount that the interface's metric should be increased. This should be
set to a number large enough to change the routing table to use another
default gateway.
(config network interface my_wwan surelink actions 0)>
metric_adjustment_modem int
(config network interface my_wwan surelink actions 0)>
The default is 100.
l
Set the time to wait before the next test is run. If set to the default value of 0s,
the test interval is used.
(config network interface my_wwan surelink actions 0)>
override_interval int
(config network interface my_wwan surelink actions 0)>
n
restart_interface.
If restart_interface is selected, complete the following:
l
Set the number of attempts for this recovery action to perform, before moving
to the next recovery action:
(config network interface my_wwan surelink actions 0)> max_
attempts int
(config network interface my_wwan surelink actions 0)>
The default is 3.
To Next Page
Loading...
Need help?
General
