Digi IX14 User Manual

Interfaces Local Area Networks (LANs)
IX14 User Guide
130
3. Click Network > Interfaces.
4. Click the menu icon (...) next to the name of the LANto be deleted and select Delete.
5. Click Apply to save the configuration and apply the change.
Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Use the del command to delete the LAN. For example, to delete a LANnamed my_lan:
(config)> del network interface my_lan
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Digi IX14 Specifications

General

Brand	Digi
Model	IX14
Category	Network Router
Language	English