Digi IX14

Services Network Time Protocol
IX14 User Guide
411
Configure the device as an NTP server
Required Configuration Items
n
Enable the NTP service.
n
At least one upstream NTP server for synchronization. The default setting is the Digi NTP
server, time.devicecloud.com.
Additional Configuration Options
n
Additional upstream NTP servers.
n
Access control list to limit downstream access to the IX14 device's NTP service.
n
The time zone setting, if the default setting of UTC is not appropriate.
To configure the IX14 device's NTP service:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > NTP.
4. Enable the IX14 device's NTP service by clicking Enable.
5. (Optional) Configure the access control list to limit downstream access to the IX14 device's
NTP service.
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses.
b. For Add Address, click .