System administration Create a Virtual LAN (VLAN) route
IX14 User Guide
311
n
Gateway: 192.168.210.1
2. Connect the PC's Ethernet port to the Ethernet port on your IX14 device.
3. Open a telnet session and connect to the IX14 device at the IP address of 192.168.210.1.
4. Log into the device:
n
Username: admin
n
Password: The default unique password for your device is printed on the device label.
5. At the shell prompt, type:
# rm /etc/config/.nocrypt
# flatfsd -i
This will re-enable encryption and leave the device at its factory default setting.
Create a Virtual LAN (VLAN) route
Virtual LANs (VLANs) allow splitting a single physical LAN into separate Virtual LANs. This is useful for
security reasons, and also helps to reduce broadcast traffic on the LAN.
To Next Page
Loading...
