Digi IX14

Firewall Packet filtering
IX14 User Guide
261
5. To disable a packet filtering rule, use the index number with the enable false command. For
example:
(config)> firewall filter 1 enable false
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Delete a packet filtering rule
To delete a packet filtering rule:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Packet filtering.
4. Click the menu icon (...) next to the appropriate packet filtering rule and select Delete.