Containers View the status of containers
IX14 User Guide
439
Command line
Show status of all containers
Use the show containers command with no additional arguments to show the status of all containers
on the system:
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers
Container Configured Enabled State
--------- ---------- ------- -----------------
mytest1 True enabled STOPPED
test_lxc True enabled RUNNING PID 19327
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show status of a specific container
Use the show containers container name command to show the status of the specified container:
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers container test_lxc
Container Configured Enabled State
--------- ---------- ------- -----------------
test_lxc True enabled RUNNING PID 19327
To Next Page
Loading...
Need help?
General
