Digi IX14

Hardware setup Attach and position antennas
IX14 User Guide
31
3. Once the surface is clean and dry, apply a small amount of dielectric grease in a thin layer over
the contacts. Use a new cotton-tipped applicator to work the grease smoothy over the
contacts. Apply gentle pressure.
4. When the dielectric grease has been applied, insert the SIM into the SIM slot as described
above.
Attach and position antennas
Note The IX14 does not include a power supply or antennas. See IX14 accessory kits for information
on IX14 power supplies and antennas.
n
Connect IX14-compatible antennas to the WWAN-1 and WWAN-2 antenna connectors on the
back of the device. Position the antennas for best reception.