User authentication Local users
IX14 User Guide
195
n
The amount of time that the user is locked out of the system after the specified number of
unsuccessful login attempts.
n
An optional public ssh key, to authenticate the user when using passwordless SSH login.
n
Two-factor authentication information for user login over SSH, telnet, and the serial console:
l
The verification type for two-factor authentication: Either time-based or counter-based.
l
The security key.
l
Whether to allow passcode reuse (time based verification only).
l
The passcode refresh interval (time based verification only).
l
The valid code window size.
l
The login limit.
l
The login limit period.
l
One-time use eight-digit emergency scratch codes.
To configure a local user:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
To Next Page
Loading...
Need help?
General
